Welcome to the new Bose.ae
 

Using the radio

Applies to:

Turning the radio on

On the remote, press FM/AM to turn on the radio to the FM or AM station last selected. Press FM/AM again to switch between FM and AM.

When the radio is playing, radio station information is displayed below the clock time.

Tuning the radio

Press FM/AM to switch between FM and AM.

Display while tuning

When you press FM/AMSeek/Track or Tune/MP3 to tune to a radio station, the frequency appears in the centre of the display while you are tuning.

FM/AM

Seek/Track

Tune/MP3

Note: five seconds after releasing FM/AMTune/MP3 or Seek/Track, the clock time returns to the centre of the display and the radio frequency appears below it.

Remote button functions for radio tuning:

  • Seek/Track back: Press to find a lower frequency station with a strong signal.
  • Seek/Track forward: Press to find a higher frequency station with a strong signal.
  • Tune/MP3 <: Press to manually tune to a lower frequency. Or press and hold to move rapidly down through the frequency band.
  • Tune/MP3 >: Press to manually tune to a higher frequency. Or press and hold to move rapidly up through the frequency band.

Note: If AM reception is weak, rotate your Wave® music system clockwise or counter-clockwise to improve AM reception. If FM reception is weak, make sure the power cable is straightened as much as possible. To improve FM reception, you can install an external FM antenna.

Was this helpful?

Submit

Thank you for submitting your comments.