Welcome to the new Bose.ae

Setting the room code

Your Wave® music system comes from the factory ready to operate as a second-room device (room code B) when connected to a Bose® link-enabled Lifestyle® system. If you want to use your Wave® music system with your Lifestyle® system beyond a second room, you will need to change the room code to match that of the remote control you are using for that room.

Refer to your Lifestyle® system owner's guide for more information on room codes.

On the remote, press and hold Alarm Setup/Menu until "Setup Menu" is displayed

Alarm Setup/Menu

Press Tune/MP3 > seven times until "Room- b" is displayed. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® system remote control

Tune/MP3 >

Press Time - or Time + to select a room code other than room b

Time –

Time +

Press Alarm Setup/Menu to exit the setup menu or wait 10 seconds for the setup menu to end automatically

Alarm Setup/Menu

Was this helpful?


Thank you for submitting your comments.