Welcome to the new Bose.ae

Replacing the cover

To replace the cover, follow these steps:

Using the 2.5 mm hex wrench supplied with the replacement cover, remove the two screws at the bottom of the speaker

Push up on the back of the cover until it slides up and loosens

Remove the existing cover by pulling the cover up and away from the speaker back

Install the new cover by aligning the holes in the cover with the anchor posts on the back of the speaker, and press the cover into place

Slide the cover down on the anchor screws until it stops

Replace and tighten the screws on the bottom of the cover

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided