If you connect digital audio from an external device to your 3·2·1 media centre using an optical cable, you must assign the source that will receive the digital audio signal through that connection. For example, if you connect the digital audio from a cable or satellite box to the media centre using an optical cable, you must assign the optical connection to the CBL∙SAT source.
You should also connect analogue audio cables (red and white RCA) to the CBL∙SAT L (left) and R (right) audio inputs on the media centre. If the digital signal is interrupted, the analogue connection will ensure continuous audio play.
To assign the optical connection, follow these steps: